Apple macOS 10.14 Mojave is up and running!

Mojave is now running on cMP 5,1 Intel 6 core 3.46GHz, Radeon 7950 (Metal compatible), 32GB RAM. It needed a firmware update prior to install.

After that was done, Mojave installed just fine. I made sure to disconnect all RAID and single media drives just in case. 

Done installing.

Firmware has been updated to Boot ROM Version 138.0.0.0.0

Only thing not working is Airdrop sharing. Apparently cMP 2012 are not compatible. 

AirDrop system requirements

To share between a Mac and an iPhone, iPad, or iPod touch, you need any of these devices and operating systems:

• Mac from 2012 or later (excluding the mid-2012 Mac Pro) using OS X Yosemite or later 

That's a real drag Apple!

Working on a short and small multicam project in FCPX 10.4.3 with 4K footage in a 1080p Timeline. I'm letting FCPX transcode the XAVC Long GOP and h264 originals to ProRes422.

Slowly working with the originals until all the transcoding is finished in the background. I can perform basic editing in Multicam mode without much problem although it is pretty sluggish each time I stop/play or try to scrub.

After transcode and waveform generation is completed, everything is very responsive. Moving quickly through the first cut. No weird behavior, no hangs to report.

Exporting a h264 one pass TC screener via Send To Compressor was at first about real time: 15min. Timeline compressed in 15min. After the second and third export for screener 2 and 3 the time went down to 8-7min so half real time. Not too bad.

Just tried a few BruceX exports and got 44sec. Not great, not too disgusting either.

Installing macOS High Sierra Onto MacPro 5,1 (cMP5,1) Patience Required!

Retracing all my steps to install a fresh macOS HighSierra on my cMP5,1 2012.

Bought a new SSD, stuck it into the Optical bay and connected it to the second Sata cable.

Emptied internal x4 Drive Bay, 16GB RAM, Radeon 5770 stock, nothing else connected but Apple Keyboard + generic mouse.

I made a USB High Sierra installer and started the computer, zapped the PRAM, it started from the USB and loaded the installer fine.

I went into Disk Util and erased the SSD using APFS. [***Do not do this! Read on!***]

Got the Firmware Update Required window:

Clicked onto Shut Down button... Nothing happened.

Went to the Menu Bar, clicked onto the Apple Logo and Shutdown from there.

Pushed and held Mac power button, LED flashed, got the long Beep, computer restarted, but no Firmware update happened.

Again got the Firmware Update Required window... What the f*^%$?

Again clicked onto Shut Down button, nothing happened.

Again went to the Menu Bar, clicked onto the Apple Logo and shutdown from there.

Again pushed and held Mac power button, LED flashed, got the long Beep, computer restarted, this time it went into Firmware Update (fat update bar instead of thin one.)

After 5 min. the computer restarted by itself, Sierra installer loaded.

Clicked Continue, then got a window "To download and restore macOS, your computer's eligibility will be verified with Apple". What???

Went back to macOS Utilities and turned on WIFI and connected to the internet. Came back to the same point...

I canceled, restarted, clicked again on install, this time it didn't show this window, go figure. Went to the installer, but it DIDN'T LIST MY SSD in the disk selection for install... !! Arrghl!

Hence do not format your SSD to APFS prior to install.

Went to macOS Utilities, Disk Utilities, tried to erase/reformat the drive to no avail (could not unmount it, and I could not see it to force unmount it.

Shutdown, removed the SSD, went to a second computer, erased the SSD, this time formatted GUID/macOS Extended.

Put it back into the computer, started again, into the installer, and bingo!

Selected the SSD and started the installation at last!

15min. later, booting into High Sierra. Success at last!

Disk Util confirms that the SSD has been erased and reformatted to APFS as part of the installation.

MacPro 5,1 Sierra 10.12.6, Radeon 5770s and 7950 FCPX, BruceX, Compressor, AME Speed Comparison

II just swapped the CPU from a quad core 3.2GHz to six core 3.46GHz on my MacPro 5,1 main machine. I will soon install macOs High Sierra and FCPX 10.4, but need to run some test first.

Also I'm looking towards buying a Radeon RX580 in the near future (when the prices are down), but in the meantime I still rely on my trustworthy Radeon 7950 Mac edition.

Also just for kicks I installed two Apple Radeon 5770s to run some processing comparisons, see results below.

A) The machine is a MacPro 5,1 mid 2012, Quad Core 3.2GHz, 16GB RAM running macOS Sierra 10.12.6. No other app than FCPX is opened, saving to the internal system SSD.

FCPX BruceX, Share ProRes4444QX
One 7950: 53sec.
Two 5770s: 45sec.

Compressor BruceX ProRes4444QX file to Youtube "Up to 4K" h264 Preset
One 7950: 75sec.
Two 5770s: 61sec.

Adobe Media Encoder BruceX ProRes4444QX file to Youtube 4K h264 Preset (GPU acceleration OpenCL)
One 7950: 13sec.
Two 5770s: 29sec.

B) The machine is a MacPro 5,1 mid 2012, Six Core 3.46GHz, 16GB RAM running macOS Sierra 10.12.6. No other app than FCPX is opened, saving to the internal system SSD.

FCPX BruceX, Share ProRes4444QX
One 7950: 53sec. (Same speed as quad core! That wasn't expected.)
Two 5770s: ??sec.

Compressor BruceX ProRes4444QX file to Youtube "Up to 4K" h264 Preset
One 7950: 42sec. (Faster than quad core, as expected.)
Two 5770s: ??sec.

Adobe Media Encoder BruceX ProRes4444QX file to Youtube 4K h264 Preset (GPU acceleration OpenCL)
One 7950: 9sec. (Faster than quad core as expected.)
Two 5770s: ??sec.